中文

How much paint do I need?

Measure once, buy once. A simple method to work out litres for walls and ceilings, with a worked example for a typical Hong Kong bedroom.

7 min readUpdated

Book your free on-site quote
An open tin of blue paint with a roller resting on top

Short answer

Add up the wall area (perimeter × height), subtract doors and windows, and add the ceiling if you're painting it. Multiply by the number of coats, then divide by the spreading rate on the tin (square metres per litre per coat). Add about 10% for rough walls, cutting in and touch-ups, and round up to the next tin size.

What you need

  • Tape measure or laser measure
  • Notepad or phone calculator
  • The product's spreading rate (on the tin or the product data sheet)

Step by step

  1. Measure the room

    Measure the length of each wall and the ceiling height. Add the wall lengths together to get the perimeter.

  2. Work out the wall area

    Multiply the perimeter by the height. This is the gross wall area in square metres.

  3. Subtract doors and windows

    Measure each door and window and subtract its area. Leave out built-in wardrobes or tiled areas you aren't painting.

  4. Add the ceiling if needed

    Ceiling area is the room length × width. Ceilings often use a different paint, so calculate it separately.

  5. Multiply by the number of coats

    Two coats is normal on a prepared wall. A big colour change or bare plaster can need more, or a primer coat first.

  6. Divide by the spreading rate

    Use the spreading rate on the tin, in square metres per litre per coat. This gives the litres you need.

    Divide by the spreading rate
  7. Add a margin and round up

    Add about 10% for rough or porous walls, cutting in and touch-ups, then round up to the tin sizes available. Buy from one batch where you can.

Worked example: a 3 m × 3.5 m bedroom

These numbers are an example to show the method, not a measurement of your room.

StepCalculationResult
Perimeter3 + 3.5 + 3 + 3.513 m
Gross wall area13 m × 2.7 m ceiling height35.1 m²
Subtract one door0.9 m × 2.0 m−1.8 m²
Subtract one window1.5 m × 1.2 m−1.8 m²
Net wall area35.1 − 1.8 − 1.831.5 m²
Two coats31.5 × 263 m²
Litres at 12 m² per litre63 ÷ 125.25 L
Add about 10%5.25 × 1.1about 5.8 L
Ceiling, two coats3 × 3.5 × 2 ÷ 12 × 1.1about 1.9 L

So the walls need about 6 litres and the ceiling about 2 litres of paint at that spreading rate. Round up to the tin sizes the brand sells.

Spreading rates: what the tin tells you

The spreading rate, sometimes called coverage, is the area one litre covers in one coat on a smooth, sealed surface. For example, Nippon Paint Hong Kong lists about 12 m² per litre per coat for its Odour-less 2-in-1 interior emulsion, about 12.7 m² for Matex M600, and 13 to 14 m² for Odour-less 5-in-1. These are theoretical figures. Real coverage is lower on rough, porous or patched walls, with a roller that holds a lot of paint, and with strong colour changes.

Always use the figure for the product you're actually buying. If the tin gives a range, use the lower number.

Things that change the amount

  • New plaster and filler soak up paint. Prime them first, or the first coat will cover much less area.
  • Big colour changes, especially dark to light, can need a third coat or a tinted primer.
  • Textured walls have more surface area than flat ones.
  • Deep colours made from a clear base often cover less well than whites and pale colours.
  • Doors and trim use a different paint. Calculate them separately with the spreading rate on that tin.
An empty room with freshly painted grey walls and a timber floor

What affects the cost

We don't publish prices. Paint is only part of a painting quotation. Labour depends on the preparation, the number of coats, the cutting in and access. See our painting cost factors guide. At the free visit we measure the rooms ourselves, so you don't need to do these sums before contacting us.

Storing leftover paint

Keep one labelled, well-sealed tin of each colour for touch-ups. Write the room, brand, colour code, finish and date on the lid. Store it away from heat and direct sun. In Hong Kong's humidity, tins can rust at the rim, so wipe the rim clean before closing.

Rather leave it to us?

WhatsApp a few photos of the walls, your location and the dates that suit you. We'll visit for free, check the walls and send a written quotation. No obligation.

Book your free on-site quote

Questions about this

How many square metres does one litre of paint cover?

It depends on the product. Interior emulsions commonly list around 12 to 14 m² per litre per coat on a smooth, sealed wall. Use the figure on your tin, and expect less on rough or porous walls.

How much paint for a whole flat?

Measure each room the same way and add them up. Ceilings and walls are usually calculated separately because they often use different paints.

Do I need primer as well?

On new plaster, filler, stains or big colour changes, yes. Calculate primer separately with its own spreading rate.

Is it better to buy too much or too little?

A little extra is better. Running out halfway can leave a visible difference between batches. Keep the leftover for touch-ups.

Do you measure for me?

Yes. At the free on-site visit we measure the rooms and check the walls, and the quotation lists the paint and coats.

Sources

Public sources we used for the Hong Kong facts on this page:

More painting guides

Related services

Book your free on-site quote.

WhatsApp us a few photos of your walls, your location and the dates that suit you. We'll arrange a free visit, from Mid-Levels to Stanley, Discovery Bay or anywhere else in Hong Kong.

Book your free on-site quoteWhatsApp +852 9282 6014